Emergency and rehabilitation of hydraulic equipment for the production of rolling stock on the rails (HARS-300 Bar)
The content of this publication is copyrighted by JSC "TH" ENERPRED ", and it cannot be reproduced (even in part) without the appropriate permission. TD "ENERPRED" reserves the right to make any changes to the design and characteristics of the tool offered in this catalog without prior notice. Tool characteristics, including weight, dimensions and other indicators, may vary slightly.
Enerpred
Designed to create the pressure and flow of hydraulic fluid in the system ENERPRED device for the production of rolling stock on the rails.
Enerpred
This type of pump station control unit is equipped to perform the operations of lifting, lowering, retention under load and rolling movements.
Enerpred
Designed for pressure generation and hydraulic liquid supply to the devices of the ENERPRED system to install a rolling stock on rails.
The manual pump drive makes it independent from power and fuel supply.
Enerpred
Designed for interconnection of all devices of the ENERPRED hydraulic system and for stopping a rolling stock on rails.
Enerpred
Designed for controlling (hydraulic flow distribution) the operation of the devices of the ENERPRED system during rolling stock installation on rails.
Enerpred
Designed to perform the operations of lifting, holding and lowering the rolling stock on the rails. The design of ENERPRED jacks allows them to be used with railway rolling stock of various types.
Enerpred
Designed for increasing the height of lift with ENERPRED jacks. They provide a high stability for ENERPRED jacks during the lift,
holding down, and lowering of a rolling stock.
Enerpred
Provide greater stability when working with ENERPRED jacks during lifting, holding and lowering of the rolling stock.
Enerpred
Designed for the cross movement of a roller beam along the ENERPRED bridge beam.
Manual repositioning: manual reposition of the movement cylinder on a bridge beam.
Hydraulic repositioning—automatic change of the position of the movement c
Enerpred
Designed for the cross movement of a roller beam along the ENERPRED bridge beam.
Manual repositioning: manual reposition of the movement cylinder on a bridge beam.
Hydraulic repositioning—automatic change of the position of the movement c
Enerpred
They are designed for movement of roller trucks along them and serve as the main supports during the lift, holding down, and
lowering of a rolling stock using an ENERPRED jack.
Enerpred
Designed for connection to the bridge girder and trolley roller cylinder displacement ENERPRED
Enerpred
They are designed to move the rolling stock in the transverse direction along the bridge beam and are the supporting and mobile platform for the ENERPRED jacks.
Enerpred
Designed for connecting two ENERPRED roller trucks during the cross movement of a rolling stock.
Enerpred
Rope system is designed for putting on the rails an overturned on the side or a strongly tilted car.
If you have any questions, contact us and we will respond to them
Contact the managerWe invite you to mutually beneficial cooperation for the promotion of the tool marks "Enerpred" in all regions of our country and abroad.
Send requestWe offer you to download our product catalog in PDF format
Download